5 मिमी सेंट गोबेन लैक्क्वेर्ड ग्लास

Name: 5mm Saint Gobain Lacquered Glass
Brand: Writing And Display
Price: 390.0 INR
Availability: InStock

Price 390.0 आईएनआर/ Square Foot

मूल्य/उद्धरण प्राप्त करें

MOQ : 1 Square Foot

5 मिमी सेंट गोबेन लैक्क्वेर्ड ग्लास उत्पाद की विशेषताएं

स्ट्रक्चर

उपयोग
औद्योगिक

मटेरियल
काँच

साइज
विभिन्न आकार

मोटाई
5 मिलीमीटर (mm)

रंग
काला

सतह
पॉलिश

पैटर्न
मैदान

5 मिमी सेंट गोबेन लैक्क्वेर्ड ग्लास व्यापार सूचना

न्यूनतम आदेश मात्रा
100

एफओबी पोर्ट
Delhi

भुगतान की शर्तें

आपूर्ति की क्षमता
5000 प्रति महीने

डिलीवरी का समय
2-7 दिन

नमूना उपलब्ध
No

नमूना नीति

पैकेजिंग का विवरण
Packaging lacquered glass requires special care to prevent damage to both the glass surface and the lacquer coating, which can be prone to scratching, chipping, or discoloration if not properly handled. Lacquered glass is often used in decorative applications such as countertops, wall panels, and furniture, where both the transparency of the glass and the appearance of the lacquer finish are important. Key Considerations for Lacquered Glass Packaging: 1. Protection of the Lacquer Finish: Protective Film or Paper: The lacquered surface should be covered with a protective film or paper, such as polyethylene film or non-abrasive paper. This layer helps prevent scratches or scuff marks during transportation. Bubble Wrap or Foam Sheets: After applying a protective film, the glass is often wrapped in bubble wrap or foam sheets to provide cushioning and absorb shocks. This ensures that any impact does not damage the glass or lacquer surface. Scratch-Proof Corners and Edges: Lacquered glass has vulnerable edges and corners that can chip easily. To prevent this, corner protectors made of foam, plastic, or cardboard should be added. These corner protectors will cushion the impact if the package is dropped or bumped during handling. 2. Support for the Glass: Crating or Boxed Packaging: The lacquered glass should be placed in a sturdy crate or reinforced cardboard box. If crating is used, the box should be custom-made to fit the exact dimensions of the glass, preventing movement within the packaging. The crate should be made from strong wood or thick cardboard to withstand handling and transport. Vertical Positioning: The glass should be placed vertically within the crate or box to reduce the amount of pressure on any single point. It also reduces the likelihood of bending or warping. Spacing and Separation: If multiple glass panels are being shipped together, spacer inserts (such as cardboard dividers or foam sheets) should be placed between the panels. This prevents them from touching or rubbing against each other, which could cause scratches or chips to the lacquered surface.